PLE/N eta
pewag winner profilift lifting point PLE/N Eta.
Tried-and-tested for pull in every direction.
Зварювання деталей машин або кузовів транспортних засобів вимагає спеціальних виробів, які ідеально підходять для підвішування підйомних і кріпильних деталей, і PLE pewag profilift eta (клас 8) є одним з них. Продукт може бути завантажений у всіх напрямках.
Таблиця характеристик
Method of lifting | |||||||||||
Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |
Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |
PLE/N eta | Code / Type | load capacity [kg] |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
PLE/N 6 | 1.120 | 1.120 | 2.240 | 2.240 | 1.500 | 1.120 | 2.300 | 1.600 | 1.120 | 1.120 | PLE/N 8 | 2.000 | 2.000 | 4.000 | 4.000 | 2.800 | 2.000 | 4.200 | 3.000 | 2.000 | 2.000 | PLE/N 10 | 3.150 | 3.150 | 6.300 | 6.300 | 4.400 | 3.150 | 6.600 | 4.700 | 3.150 | 3.150 | PLE/N 13 | 5.300 | 5.300 | 10.600 | 10.600 | 7.400 | 5.300 | 11.200 | 7.900 | 5.300 | 5.300 | PLE/N 16 | 8.000 | 8.000 | 16.000 | 16.000 | 11.300 | 8.000 | 16.900 | 12.000 | 8.000 | 8.000 | PLE/N 22 | 15.000 | 15.000 | 30.000 | 30.000 | 21.000 | 15.000 | 31.800 | 22.500 | 15.000 | 15.000 |
PLE/N eta | Code / Type | load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
d [mm] |
e [mm] |
f [mm] |
h [mm] |
l [mm] |
weight [kg/pc.] |
---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
PLE/N 6 | 1.120 | 36 | 40 | 62 | 11 | 67 | 42 | 26 | 35 | 0,31 | PLE/N 8 | 2.000 | 37 | 42 | 69 | 13 | 73 | 45 | 28 | 37 | 0,40 | PLE/N 10 | 3.150 | 41 | 45 | 78 | 16,50 | 80 | 47 | 34 | 40 | 0,63 | PLE/N 13 | 5.300 | 61 | 55 | 99 | 22 | 97 | 53 | 44 | 50 | 1,46 | PLE/N 16 | 8.000 | 63 | 70 | 120 | 25 | 120 | 73 | 48 | 64 | 2,30 | PLE/N 22 | 15.000 | 89 | 97 | 163 | 33 | 163 | 92 | 70 | 90 | 5,40 |
Safety factor 4 Important: Subject to technical changes! |
Опис продукту
Permitted usage
For load capacities in the permitted directions of pull (fig. Permitted usage and permitted direction of pull), please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.