PLBW beta
pewag winner profilift lifting point PLBW Beta.
Five-fold safety.
Це ще одна такелажна точка, яка обертається на 360 °. Навантажувальне кільце переміщується під кутом 180 ° і може бути розташоване під будь-яким необхідним кутом завдяки її змінній та запатентованій пружині. У дозволених випадках ця такелажна точка забезпечує п'ятикратну безпеку.
Кожна такелажна точка pewag постачається з індивідуальним серійним номером. Вони позначені допустимою вантажопідйомністю. Гвинт перевіряється на 100%, а також покритий захистом від корозії і позначений вантажопідйомністю та розміром різьби. Її можна затягнути шестигранним ключем або гайковим ключем.
Варіанти з метричною різьбою також доступні з індивідуальними довжинами різьб.
Також доступні з peTAG за запитом.
Specification table
| PLBW beta | Code / Type | thread [mm] |
load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
e [mm] |
f [mm] |
g [mm] |
h [mm] |
n [mm] |
n max [mm] |
 [mm] |
 [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PLBW 0,3 t | M8 | 300 | 29 | 56 | 30 | 38 | 18 | 27 | 94 | 13 | 80 | 8 | 15 | 0.31 | PLBW 0,6 t | M10 | 600 | 29 | 56 | 30 | 38 | 18 | 27 | 94 | 15 | 100 | 8 | 15 | 0.35 | PLBW 1 t | M12 | 1,000 | 29 | 56 | 30 | 38 | 18 | 27 | 94 | 17 | 180 | 8 | 15 | 0.37 | PLBW 1,3 t | M14 | 1,300 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 22 | 220 | 10 | 24 | 1.03 | PLBW 1,6 t | M16 | 1,600 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 24 | 260 | 10 | 24 | 1.04 | PLBW 2 t | M18 | 2,000 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 27 | 295 | 10 | 24 | 1.07 | PLBW 2,5 t | M20 | 2,500 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 30 | 335 | 10 | 24 | 1.08 | PLBW 3 t | M22 | 3,000 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 33 | 355 | 14 | 36 | 3.50 | PLBW 4 t | M24 | 4,000 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 36 | 355 | 14 | 36 | 3.60 | PLBW 5 t | M27 | 5,000 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 40 | 355 | 14 | 36 | 3.60 | PLBW 6,3 t | M30 | 6,300 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 45 | 355 | 14 | 36 | 3.70 | PLBW 8 t | M33 | 8,000 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 54 | 328 | 19 | 55 | 14.30 | PLBW 10 t | M36 | 10,000 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 59 | 328 | 19 | 55 | 14.40 | PLBW 12,5 t | M42 | 12,500 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 69 | 328 | 19 | 55 | 14.70 | PLBW 15 t | M48 | 15,000 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 74 | 328 | 19 | 55 | 15.00 |
| PLBW beta | Code / Type | thread [inch] |
load capacity [lbs] |
a [inch] |
b [inch] |
c [inch] |
e [inch] |
f [inch] |
g [inch] |
h [inch] |
n [inch] |
n max [inch] |
[inch] |
[inch] |
weight [lbs/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLBW U 5/16 | 5/16"-18 | 660 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.51 | - | 5/16" | 5/8" | 0.71 | PLBW U 3/8 | 3/8"-16 | 1,300 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.59 | - | 5/16" | 5/8" | 0.73 | PLBW U 7/16 | 7/16"-14 | 2,200 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.67 | - | 5/16" | 5/8" | 0.75 | PLBW U 1/2 | 1/2"-13 | 2,200 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.67 | - | 5/16" | 5/8" | 0.77 | PLBW U 9/16 | 9/16"-12 | 3,000 | 1.69 | 3.11 | 1.77 | 2.17 | 0.98 | 1.50 | 5.43 | 0.87 | - | 5/16" | 1" | 2.27 | PLBW U 5/8 | 5/8"-11 | 3,500 | 1.69 | 3.11 | 1.77 | 2.17 | 0.98 | 1.50 | 5.43 | 0.94 | - | 5/16" | 1" | 2.29 | PLBW U 3/4 | 3/4"-10 | 5,500 | 1.69 | 3.11 | 1.77 | 2.17 | 0.98 | 1.50 | 5.43 | 1.18 | - | 5/16" | 1" | 2.38 | PLBW U 7/8 1) | 7/8"-9 | 8,800 | 2.52 | 4.65 | 2.68 | 3.35 | 1.50 | 2.28 | 8.23 | 1.42 | - | 9/16" | 1 3/8" | 7.78 | PLBW U 1 1) | 1"-8 | 11,000 | 2.52 | 4.65 | 2.68 | 3.35 | 1.50 | 2.28 | 8.23 | 1.57 | - | 9/16" | 1 3/8" | 7.89 | PLBW U 1 1/8 1) | 1 1/8"-7 | 13,500 | 2.52 | 4.65 | 2.68 | 3.35 | 1.50 | 2.28 | 8.23 | 1.77 | - | 9/16" | 1 3/8" | 8.07 | PLBW U 1 1/4 1) | 1 1/4"-7 | 17,500 | 4.17 | 7.40 | 4.25 | 5.20 | 2.36 | 3.58 | 13.03 | 2.13 | - | 3/4" | 2 3/16" | 32.00 | PLBW U 1 3/8 1) | 1 3/8"-6 | 22,000 | 4.17 | 7.40 | 4.25 | 5.20 | 2.36 | 3.58 | 13.03 | 2.32 | - | 3/4" | 2 3/16" | 32.20 |
| Method of lifting |  |
 |
 |
 |
 |
|
 |
|
 |
 |
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLBW beta | Code / Type | thread [mm] |
fastening torque [Nm] |
load capacity [kg] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLBW 0,3 t | M8 | 6 | 500 | 300 | 1,000 | 600 | 400 | 300 | 600 | 450 | 300 | 300 | PLBW 0,6 t | M10 | 10 | 1,000 | 600 | 2,000 | 1,200 | 800 | 600 | 1,300 | 900 | 600 | 600 | PLBW 1 t | M12 | 15 | 1,300 | 1,000 | 2,600 | 2,000 | 1,400 | 1,000 | 2,100 | 1,500 | 1,000 | 1,000 | PLBW 1,3 t | M14 | 30 | 2,000 | 1,300 | 4,000 | 2,600 | 1,800 | 1,300 | 2,700 | 1,900 | 1,300 | 1,300 | PLBW 1,6 t | M16 | 50 | 2,500 | 1,600 | 5,000 | 3,200 | 2,200 | 1,600 | 3,400 | 2,400 | 1,600 | 1,600 | PLBW 2 t | M18 | 70 | 3,000 | 2,000 | 6,000 | 4,000 | 2,800 | 2,000 | 4,200 | 3,000 | 2,000 | 2,000 | PLBW 2,5 t | M20 | 100 | 3,500 | 2,500 | 7,000 | 5,000 | 3,500 | 2,500 | 5,300 | 3,700 | 2,500 | 2,500 | PLBW 3 t | M22 | 120 | 4,500 | 3,000 | 9,000 | 6,000 | 4,200 | 3,000 | 6,300 | 4,500 | 3,000 | 3,000 | PLBW 4 t | M24 | 160 | 5,500 | 4,000 | 11,000 | 8,000 | 5,600 | 4,000 | 8,400 | 6,000 | 4,000 | 4,000 | PLBW 5 t | M27 | 200 | 6,500 | 5,000 | 13,000 | 10,000 | 7,000 | 5,000 | 10,500 | 7,500 | 5,000 | 5,000 | PLBW 6,3 t | M30 | 250 | 7,000 | 6,300 | 14,000 | 12,600 | 8,800 | 6,300 | 13,200 | 9,400 | 6,300 | 6,300 | PLBW 8 t | M33 | 270 | 9,000 | 8,000 | 18,000 | 16,000 | 11,000 | 8,000 | 16,500 | 12,000 | 8,000 | 8,000 | PLBW 10 t | M36 | 320 | 11,000 | 10,000 | 22,000 | 20,000 | 14,000 | 10,000 | 21,000 | 15,000 | 10,000 | 10,000 | PLBW 12,5 t | M42 | 400 | 13,500 | 12,500 | 27,000 | 25,000 | 17,500 | 12,500 | 26,300 | 18,700 | 12,500 | 12,500 | PLBW 15 t | M48 | 600 | 16,000 | 15,000 | 32,000 | 30,000 | 21,000 | 15,000 | 32,000 | 22,500 | 15,000 | 15,000 |
| Method of lifting | |
|
|
|
|
|
|
|
|
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | |||
| PLBW beta | Code / Type | thread [inch] |
fastening torque [ft-lbs] |
load capacity [lbs] |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLBW U 5/16 | 5/16"-18 | 4.50 | 1,100 | 660 | 2,200 | 1,320 | 900 | 660 | 1,400 | 900 | 660 | PLBW U 3/8 | 3/8"-16 | 7.50 | 2,200 | 1,300 | 4,400 | 2,600 | 1,800 | 1,300 | 2,700 | 1,900 | 1,300 | PLBW U 7/16 | 7/16"-14 | 11 | 2,800 | 2,200 | 5,600 | 4,400 | 3,000 | 2,200 | 4,600 | 3,300 | 2,200 | PLBW U 1/2 | 1/2"-13 | 11 | 2,800 | 2,200 | 5,600 | 4,400 | 3,000 | 2,200 | 4,600 | 3,300 | 2,200 | PLBW U 9/16 | 9/16"-12 | 22 | 4,400 | 3,000 | 8,800 | 6,000 | 4,200 | 3,000 | 6,300 | 4,500 | 3,000 | PLBW U 5/8 | 5/8"-11 | 37 | 5,500 | 3,500 | 11,000 | 7,000 | 4,900 | 3,500 | 7,300 | 5,200 | 3,500 | PLBW U 3/4 | 3/4"-10 | 74 | 6,600 | 5,500 | 13,200 | 11,000 | 7,700 | 5,500 | 11,500 | 8,200 | 5,500 | PLBW U 7/8 1) | 7/8"-9 | 118 | 12,000 | 8,800 | 24,000 | 17,600 | 12,300 | 8,800 | 18,500 | 13,200 | 8,800 | PLBW U 1 1) | 1"-8 | 148 | 13,000 | 11,000 | 26,000 | 22,000 | 15,400 | 11,000 | 23,000 | 16,500 | 11,000 | PLBW U 1 1/8 1) | 1 1/8"-7 | 185 | 14,300 | 13,500 | 28,600 | 27,000 | 18,900 | 13,500 | 28,300 | 20,200 | 13,500 | PLBW U 1 1/4 1) | 1 1/4"-7 | 200 | 19,800 | 17,500 | 39,600 | 35,000 | 24,500 | 17,500 | 36,700 | 26,200 | 17,500 | PLBW U 1 3/8 1) | 1 3/8"-6 | 236 | 24,000 | 22,000 | 48,000 | 44,000 | 30,800 | 22,000 | 46,200 | 33,000 | 22,000 |
| 1) Safety factor 4 | ||||||||||||
| Safety factor 5 Important: Subject to technical changes! |
||||||||||||
Product description
Permitted usage
For load capacities in the permitted directions of pull please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
The loading ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.
Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a crack-tested, corrosion-proofed screw nut.
For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.
3D views
Videos
Downloads
PLBW 0,3 t |
|
|
|
PLBW 0,6 t |
|
|
|
PLBW 1 t |
|
|
|
PLBW 1,3 t |
|
|
|
PLBW 1,6 t |
|
|
|
PLBW 10 t |
|
|
|
PLBW 12,5 t |
|
|
|
PLBW 15 t |
|
|
|
PLBW 2 t |
|
|
|
PLBW 2,5 t |
|
|
|
PLBW 3 t |
|
|
|
PLBW 4 t |
|
|
|
PLBW 5 t |
|
|
|
PLBW 6,3 t |
|
|
|
PLBW 8 t |
|
|
|
PLBW U 1 |
|
|
|
PLBW U 1 1/4 |
|
|
|
PLBW U 1 1/8 |
|
|
|
PLBW U 1 3/8 |
|
|
|
PLBW U 1/2 |
|
|
|
PLBW U 3/4 |
|
|
|
PLBW U 3/8 |
|
|
|
PLBW U 5/16 |
|
|
|
PLBW U 5/8 |
|
|
|
PLBW U 7/16 |
|
|
|
PLBW U 7/8 |
|
|
|
PLBW U 9/16 |
|
|
|