PLDW Delta
pewag winner profilift lifting point PLDW Delta.Rotatable even under load.
Ця такелажна точка поставляється з кульковим підшипником і обертається на 360 ° навіть під навантаженням. Високоміцна підйомна ланка рухлива на 180°. Спеціальний гвинт захищений від корозії і позначений параметрами вантажопідйомністі та розміром різьби. Крім того, кожна такелажна точка позначена окремим серійним номером.
Також доступні з peTAG за запитом.
Specification table
| PLDW Delta | Code / Type | thread [mm] |
load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
d [mm] |
e [mm] |
n [mm] |
n max [mm] |
 [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PLDW 0,3 t | M8 | 300 | 30 | 38 | 54 | 13 | 38 | 20 | 100 | 34 | 0.45 | PLDW 0,5 t | M10 | 500 | 30 | 38 | 54 | 13 | 38 | 20 | 180 | 34 | 0.45 | PLDW 0,7 t | M12 | 700 | 35 | 48 | 54 | 13 | 38 | 22 | 200 | 34 | 0.48 | PLDW 1 t | M14 | 1,000 | 35 | 48 | 54 | 13 | 38 | 22 | 200 | 34 | 0.49 | PLDW 1,5 t | M16 | 1,500 | 35 | 48 | 54 | 13 | 38 | 33 | 250 | 34 | 0.51 | PLDW 2,5 t | M20 | 2,500 | 35 | 55 | 75 | 16 | 55 | 33 | 250 | 46 | 1.05 | PLDW 4 t | M24 | 4,000 | 40 | 66 | 82 | 17 | 63 | 40 | 300 | 50 | 1.50 | PLDW 6,7 t | M30 | 6,700 | 50 | 70 | 92 | 23 | 72 | 40 | 300 | 60 | 2.49 | PLDW 8 t | M36 | 8,000 | 50 | 91 | 120 | 23 | 92 | 55 | 300 | 75 | 4.30 | PLDW 10 t | M42 | 10,000 | 65 | 91 | 120 | 27 | 92 | 60 | 300 | 75 | 5.10 | PLDW 12 t 1) | M45 | 12,000 | 65 | 91 | 120 | 27 | 92 | 68 | - | 75 | 5.20 | PLDW 12,5 t | M48 | 12,500 | 65 | 116 | 120 | 27 | 92 | 68 | 300 | 75 | 5,4 | PLDW 24 t | M56 | 24,000 | 70 | 105 | 154 | 33 | 110 | 84 | 300 | 95 | 10.20 | PLDW 25 t | M64 | 25,000 | 70 | 105 | 154 | 33 | 110 | 96 | 300 | 95 | 11.00 | PLDW 40 t | M72 | 40,000 | 90 | 130 | 213 | 45 | 170 | 110 | 500 | 145 | 29.00 | PLDW 45 t | M80 | 45,000 | 90 | 130 | 213 | 45 | 170 | 120 | 500 | 145 | 30.00 | PLDW M90 - 55 t | M90 | 55,000 | 90 | 130 | 213 | 45 | 170 | 135 | 500 | 145 | 32.00 | PLDW M100 - 55 t | M100 | 55,000 | 90 | 130 | 213 | 45 | 170 | 150 | 500 | 145 | 35.00 |
| PLDW Delta | Code / Type | thread [inch] |
load capacity [lbs] |
a [inch] |
b [inch] |
c [inch] |
d [inch] |
e [inch] |
n [inch] |
n max [inch] |
[inch] |
weight [lbs/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLDW U 3/8 | 3/8"-16 | 1,100 | 1.18 | 1.50 | 2.13 | 0.51 | 1.50 | 0.59 | - | 1.34 | 1.00 | PLDW U 1/2 | 1/2"-13 | 1,500 | 1.38 | 1.89 | 2.13 | 0.51 | 1.50 | 0.79 | - | 1.34 | 1.06 | PLDW U 5/8 | 5/8"-11 | 3,300 | 1.38 | 1.89 | 2.13 | 0.51 | 1.50 | 0.98 | - | 1.34 | 1.10 | PLDW U 3/4 | 3/4"-10 | 4,400 | 1.38 | 2.17 | 2.95 | 0.63 | 2.17 | 1.18 | - | 1.81 | 2.43 | PLDW U 1 | 1"-8 | 8,800 | 1.57 | 2.60 | 3.23 | 0.67 | 2.48 | 1.57 | - | 1.97 | 3.30 | PLDW U 1 1/4 | 1 1/4"-7 | 14,700 | 1.97 | 2.76 | 3.62 | 0.91 | 2.83 | 1.77 | - | 2.36 | 5.70 | PLDW U 1 1/2 | 1 1/2"-6 | 17,600 | 1.97 | 3.58 | 4.72 | 0.91 | 3.62 | 2.17 | - | 2.95 | 9.50 | PLDW U 1 3/4 | 1 3/4"-5 | 22,000 | 2.56 | 3.58 | 4.72 | 1.06 | 3.62 | 2.36 | - | 2.95 | 11.20 | PLDW U 2 | 2"-4.5 | 27,500 | 2.56 | 4.57 | 4.72 | 1.06 | 3.62 | 2.68 | - | 2.95 | 11.90 | PLDW U 2 1/2 | 2 1/2"-4 | 39,600 | 2.76 | 4.13 | 6.06 | 1.30 | 4.33 | 3.78 | - | 3.74 | 22.40 |
| Method of lifting |  |
 |
 |
 |
 |
|
 |
|
 |
 |
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLDW Delta | Code / Type | thread [mm] |
fastening torque [Nm] |
load capacity [kg] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLDW 0,3 t | M8 | 10 | 600 | 300 | 1,200 | 600 | 400 | 300 | 600 | 400 | 300 | 300 | PLDW 0,5 t | M10 | 10 | 1,200 | 500 | 2,400 | 1,000 | 700 | 500 | 1,000 | 750 | 500 | 500 | PLDW 0,7 t | M12 | 15 | 1,800 | 700 | 3,600 | 1,400 | 950 | 700 | 1,400 | 1,000 | 700 | 700 | PLDW 1 t | M14 | 25 | 2,400 | 1,000 | 4,800 | 2,000 | 1,400 | 1,000 | 2,100 | 1,500 | 1,000 | 1,000 | PLDW 1,5 t | M16 | 30 | 2,800 | 1,500 | 5,600 | 3,000 | 2,100 | 1,500 | 3,100 | 2,100 | 1,500 | 1,500 | PLDW 2,5 t | M20 | 80 | 5,000 | 2,500 | 10,000 | 5,000 | 3,500 | 2,500 | 5,300 | 3,500 | 2,500 | 2,500 | PLDW 4 t | M24 | 150 | 7,000 | 4,000 | 14,000 | 8,000 | 5,500 | 4,000 | 8,400 | 6,000 | 4,000 | 4,000 | PLDW 6,7 t | M30 | 230 | 10,000 | 6,700 | 20,000 | 13,400 | 9,400 | 6,700 | 14,200 | 10,000 | 6,700 | 6,700 | PLDW 8 t | M36 | 450 | 12,500 | 8,000 | 25,000 | 16,000 | 11,200 | 8,000 | 16,800 | 12,000 | 8,000 | 8,000 | PLDW 10 t | M42 | 600 | 16,000 | 10,000 | 32,000 | 20,000 | 14,000 | 10,000 | 21,000 | 15,000 | 10,000 | 10,000 | PLDW 12 t 1) | M45 | 600 | 16,000 | 12,000 | 32,000 | 24,000 | 16,900 | 12,000 | 25,400 | 18,000 | 12,000 | 12,000 | PLDW 12,5 t | M48 | 600 | 16,000 | 12,500 | 32,000 | 25,000 | 17,500 | 12,500 | 26,200 | 18,000 | 12,500 | 12,500 | PLDW 24 t | M56 | 800 | 28,000 | 24,000 | 56,000 | 48,000 | 33,900 | 24,000 | 50,900 | 36,000 | 24,000 | 24,000 | PLDW 25 t | M64 | 800 | 28,000 | 25,000 | 56,000 | 50,000 | 35,300 | 25,000 | 53,000 | 37,500 | 25,000 | 25,000 | PLDW 40 t | M72 | 1,200 | 60,000 | 40,000 | 120,000 | 80,000 | 56,500 | 40,000 | 84,800 | 60,000 | 40,000 | 40,000 | PLDW 45 t | M80 | 1,400 | 60,000 | 45,000 | 120,000 | 90,000 | 63,600 | 45,000 | 95,400 | 67,500 | 45,000 | 45,000 | PLDW M90 - 55 t | M90 | 1,500 | 60,000 | 55,000 | 120,000 | 110,000 | 77,700 | 55,000 | 116,600 | 82,500 | 55,000 | 55,000 | PLDW M100 - 55 t | M100 | 1,600 | 60,000 | 55,000 | 120,000 | 110,000 | 77,700 | 55,000 | 116,600 | 82,500 | 55,000 | 55,000 |
| Method of lifting | |
|
|
|
|
|
|
|
|
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | |||
| PLDW Delta | Code / Type | thread [inch] |
fastening torque [ft-lbs] |
load capacity [lbs] |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLDW U 3/8 | 3/8"-16 | 7.50 | 2,640 | 1,100 | 5,290 | 2,200 | 1,550 | 1,100 | 2,330 | 1,650 | 1,100 | PLDW U 1/2 | 1/2"-13 | 11 | 3,900 | 1,500 | 7,900 | 3,000 | 2,100 | 1,500 | 3,200 | 2,300 | 1,500 | PLDW U 5/8 | 5/8"-11 | 22 | 6,100 | 3,300 | 12,300 | 6,600 | 4,600 | 3,300 | 7,000 | 4,900 | 3,300 | PLDW U 3/4 | 3/4"-10 | 60 | 8,800 | 4,400 | 17,600 | 8,800 | 6,200 | 4,400 | 9,300 | 6,600 | 4,400 | PLDW U 1 | 1"-8 | 110 | 15,400 | 8,800 | 30,800 | 17,600 | 12,400 | 8,800 | 18,700 | 13,200 | 8,800 | PLDW U 1 1/4 | 1 1/4"-7 | 170 | 22,000 | 14,700 | 44,000 | 29,500 | 20,800 | 14,700 | 31,300 | 22,100 | 14,700 | PLDW U 1 1/2 | 1 1/2"-6 | 330 | 27,500 | 17,600 | 55,100 | 35,200 | 24,600 | 17,600 | 37,400 | 26,400 | 17,600 | PLDW U 1 3/4 | 1 3/4"-5 | 440 | 35,200 | 22,000 | 70,500 | 44,000 | 31,100 | 22,000 | 46,700 | 33,000 | 22,000 | PLDW U 2 | 2"-4.5 | 440 | 35,200 | 27,500 | 70,500 | 55,100 | 38,900 | 27,500 | 58,400 | 41,300 | 27,500 | PLDW U 2 1/2 | 2 1/2"-4 | 600 | 61,700 | 39,600 | 123,400 | 79,300 | 56,100 | 39,600 | 84,100 | 59,500 | 39,600 |
| 1) No stock item, delivery time on request | ||||||||||||
| Safety factor 4 Important: Subject to technical changes! |
||||||||||||
Product description
Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
Although the upper part is ball bearing and rotatable 360°, before usage you should adjust the ring in the correct direction of tension (fig. Permitted directions of pull). That applies in particular when lifting with multi leg slings. With a non-aligned ring (fig. Non-permitted directions of pull), the ring holder could turn suddenly under load, and it comes to high risk for the load and/or people.
Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a crack-tested, corrosion-proofed screw nut (applicable up to size M64). From thread size M72, the delivery is made with a nut (1.5 times the height) manufactured according to DIN 6331.
3D views
Videos
Downloads
PLDW 0,3 t |
|
|
|
PLDW 0,5 t |
|
|
|
PLDW 0,7 t |
|
|
|
PLDW 1 t |
|
|
|
PLDW 1,5 t |
|
|
|
PLDW 10 t |
|
|
|
PLDW 12 t |
|
|
|
PLDW 12,5 t |
|
|
|
PLDW 2,5 t |
|
|
|
PLDW 24 t |
|
|
|
PLDW 25 t |
|
|
|
PLDW 4 t |
|
|
|
PLDW 40 t |
|
|
|
PLDW 45 t |
|
|
|
PLDW 6,7 t |
|
|
|
PLDW 8 t |
|
|
|
PLDW M100 - 55 t |
|
|
|
PLDW M90 - 55 t |
|
|
|
PLDW U 1 |
|
|
|
PLDW U 1 1/2 |
|
|
|
PLDW U 1 1/4 |
|
|
|
PLDW U 1 3/4 |
|
|
|
PLDW U 1/2 |
|
|
|
PLDW U 2 |
|
|
|
PLDW U 2 1/2 |
|
|
|
PLDW U 3/4 |
|
|
|
PLDW U 3/8 |
|
|
|
PLDW U 5/8 |
|
|
|